全部分类
单模Turnkey 系统(405-1550nm)
关键词:
所属分类:
产品参数
Features
-
405nm to 1600nm
-
High output powers from singlemode fiber
-
High stability
-
Narrow linewidths
-
Variable output
- Modulation to 2 MHz
- Certified turnkey system
The Series of Turnkey Fiber Coupled Lasers are designed to make using lasers easy and convenient. These systems have higher output powers, typically 10-60mW coupled to singlemode fiber, versus 1mW or less that is usually available. A range of discrete wavelengths cover the span from 405nm to 1600nm.
Internally the lasers are coupled to singlemode fiber for that particular wavelength. All lasers are temerature controlled for highest stability. Output is spatially filtered and can be adjusted from 0 to full power using the knob or an external voltage source. The laser can run in CW or pulsed mode. Includes 1 meter fiber patchcord.
Output of the fiber can be collimated with our FC Series of fiber collimators with adjustable focus. They are avaible with apertures from 5mm to 45mm and give beam sizes from 2mm to 33mm. Receptacles on the collimators are either FC or FC/APC. Please see the Fiber Collimator data sheet.
Optical |
Spectrum from end of fiber. Wavelength is 638nm with spectral width <0.1nm FWHM. Resolution limited by spectrum analyzer. |
|
Wavelength: |
405nm to 1600nm |
|
Wavelength tolerance: |
+/-10nm to +/-1nm |
|
Spectral width: |
<0.1nm for most |
|
Output power: |
10-60mW for most |
|
Power stability: |
<1% for most |
|
Internal fiber: |
Singlemode for wavelength |
|
Mechanical |
||
Back connectors: |
BNC, interlock |
|
Front connectors: |
FC/APC or FC/PC laser receptacle, |
|
Electrical |
||
Power requirements: |
90-125 VAC, 190-250 VAC, 47-63Hz |
|
Environmental |
||
Operating temperature: |
15 to 30 deg. C non condensing |
|
Storage temperature: |
0 to 50 deg. C |
|
Compliance |
||
CDRH 21 CFR1040.10 certified and IEC 60825-1.2 compliant for end use. |
相关产品
ONLINE MESSAGE
在线留言
*注:请务必信息填写准确,并保持通讯畅通,我们会尽快与你取得联系